Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Other

The Big Honzo is a killer bike for the price. It's got everything you need and nothing you don't. Hubs featuring Boost spacing hold nice, beefy 2.8" tires. Hydraulic disc brakes and an 11-speed drivetrain keep the ride feel consistent and intuitive. This is the perfect bike for when you need a little extra grip rolling over tricky roots and rocks.
The Big Honzo DL is exactly what the name implies. It's a Honzo with bigger tires and a nice build kit featuring hydraulic disc brakes and 130mm of suspension. You'll get a little extra squish thanks to the 2.8" tires that absorb bumps with ease. Comfortable geometry and an adjustable travel dropper post ensure you're always at just the right position on your bike whether you're climbing that big mountain or descending down your favorite flow trail!
Much like its larger-wheeled sibling, the Mahuna, the Cinder Cone is the perfect all-rounder for the person looking to ride off-road or cruise around the backwoods bike paths. It features an air fork with 100mm of travel, as well as a dependable 11-speed drivetrain and disc brakes. If you're a fan of plus bikes, you can run up to 2.8" tires. The Cinder Cone is where the mountain meets functionality at a great price.
This Kona classic brings some of the finer things to light. The Fire Mountain is running a smooth-shifting 9-speed drivetrain to keep things manageable across varying terrain and hydraulic disc brakes to stop on a dime. With 100mm of adjustable suspension and sturdy tires aboard wider 27mm rims, the Fire Mountain helps build confidence off-road. Available for smaller riders in a 26" wheeled XS version and a 27.5" wheel for sizes S-XL. Wheel size: - Size X-Small: 26-inch - Sizes Small – X-Large: 27.5-inch
If you're looking for a bike that is a little bit XC and a little bit rock n' roll, look no further than the Hei Hei. Our Race Light 6061 Aluminum frame has been perfectly designed to be fast and strong. A 120mm fork keeps things controlled on the front end while the rear shock provides 100mm of travel and keeps the back end in check. A 12-speed drivetrain is the perfect complement to powerful hydraulic disc brakes and keeps the Hei Hei at the forefront of the most-wanted aluminum XC steeds. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. FUSE INDEPENDENT SUSPENSION The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
The Hei Hei CR marries practical and sleek together to produce a workhorse of a bike. We put the focus on making this bike fast and functional while maintaining a price point that allows for more people to enter the realm of a higher-end XC bike without the highest-end price tag. The Hei Hei CR features Kona Race Light Carbon frame with geometry designed to make longer rides more achievable for every rider. This is the perfect bike for riders looking to smash lines between the tape or take on the local epic loops.
The Hei Hei CR DL is a bike that wins big. It's bagged three 24-hour solo world championships under Cory Wallace. It's won huge stage races and its bagged world records. The gorgeous Kona Race Light Carbon frame features tasty, high-end components that are light, sturdy, and intended to go the distance. Don't be fooled by the 120mm of travel. We built this bike so not only does it climb like a bat out of hell, but it is fully capable of taking you down some seriously tricky terrain. Go fast and win big with the Hei Hei CR DL. KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. FUSE INDEPENDENT SUSPENSION The Fuse Independent Suspension is designed to be as lightweight and efficient as possible, oriented specifically for the demands of the modern XC trail rider. Like all of our suspension platforms, the Fuse IS is designed around a single pivot with a predictable leverage ratio for a responsive, snappy feel. Built for our Hei Hei platform, the frame features a seat stay that relies on small degrees of frame flex rather than a pivot at the seat and chainstay junction. The result is an efficient, laterally stiff suspension system that takes weight savings to a new level.
Often imitated, but never duplicated, the Honzo is a part of Kona's foundation. The Honzo is the solution for the rider wanting something a bit more aggressive than a traditional cross-country hardtail. A 120mm fork provides just enough suspension to make quick work of technical sections of trail. Whether you're a seasoned rider looking for a timeless hardtail or a newer rider looking to go a bit deeper into the mountain bike world, the Honzo is an excellent choice.
For the hardtail enthusiast, the Honzo DL is a quintessential bike to have in your quiver. Featuring an aluminum frame with geometry derived from the Process 134 it's ready to rip up and down the trails. A short seat tube allows you to run a longer dropper post, and adjustable dropouts allow you to run the bike geared or as a single speed. Sitting squarely between the Honzo and the Honzo ESD – the Honzo DL is the all-round hardtail for any location. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted.
If Mad Max rode a bike, it would be the Honzo ESD. It's part Honzo, part monster, and with geometry that inspired the Process X, it's made for those who want to punish the trails. A steel frame holds a Marzocchi Bomber Z1 fork with 150mm of travel. It's got strong 4-piston brakes, grippy Maxxis rubber, and a headtube badge that will scare your children at night. This is the Warrior of the Wasteland.
It's called the Kahuna for a reason. This bike is the king of our classic hardtail lineup and it's often the bike that makes people realize how awesome a mountain bike can be. With its confidence-inspiring progressive geometry, 29" wheels, 100mm suspension fork, and internal cable routing for an optional dropper post, the Kahuna is at home on your local singletrack or flow park. The Kahuna features nice touches such as a 12-speed drivetrain and powerful hydraulic disc brakes. It's the bike that's ready to get you to the next level!
We all remember our first mountain bike. For many of us, it was a bike like the Lana'I. Affordable enough not to feel too risky but stocked with components that give you the freedom to explore off-road. The Lana'I features integrated shifters and brake levers to streamline the cockpit and is now available in three wheel sizes: 26" for size XS, 27.5" for S and M, and 29" for L and XL. With an 8-speed drivetrain, grippy disc brakes, and a 100mm travel fork, the Lana'I is the perfect way to taste what real singletrack riding has to offer. Wheel size: - Sizes X-Small: 26-inch - Sizes Small – Medium: 27.5-inch - Sizes Large – X-Large: 29-inch
The Lava Dome is kind of like your best friend, but in bike form. It's awesome in the dirt. It's awesome to rally around town. It's awesome poking around neighborhood singletrack, and it does it all in a dependable way. The Lava Dome features an easy-to-use 9-speed drivetrain with a clutch rear derailleur as well as sleek internal cable routing and dropouts. With strong 29" wheels that can accept up to 2.6" tires, this bike is ready for everything in its path!
The Mahuna strikes that perfect balance of mountain bike and all-around fun rig. Its 29" wheels easily roll over obstacles and provide a smooth, predictable ride. The fork features 100mm of smooth travel and together with the 29" wheels, helps keep bumps in check. You have complete control over stopping with powerful hydraulic disc brakes. An 11-speed drivetrain makes quick work of tough hills ensuring the Mahuna is as fun going up as it is going down.
The Process 134 27.5 is an excellent bike for someone looking to dip their toe into full-suspension mountain biking, and it's a great choice for riders of any size. It's affordable and capable of riding all kinds of terrain. It features front and rear thru-axles, tunable suspension, and long-travel droppers.
This is an excellent bike for someone looking to dip their toe into full-suspension mountain biking. It's affordable and capable of riding all kinds of terrain. Front and rear thru-axles, air suspension, and long-travel droppers—it has everything a rider needs to get started with a modern frame that is ready to rip, right out of the box.
The Process 134 CR is one of our best-selling machines for so many reasons: it's a carbon-framed bike that won't destroy your wallet, it features a workhorse Shimano groupset, and it's good at all the things. Easy on the ups, fun on the downs. Playful? Yep, that too. KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
The Process 134 CR DL is the Beauty and the Beast of our lineup. Its sleek, cable-free lines and killer, top-of-the-line spec will turn heads all season long. Meanwhile, the 134mm of rear travel descends like nothing you've ever experienced on a mid-travel trail bike. This bike is our secret weapon. It climbs lightning fast and rips downhills like a hungry cougar chasing an ill-fated deer. Sorry, deer. Your time is up.
You want a nice bike, but you've been hesitating to pull the trigger. What's the right amount of travel? How can you be sure you're getting great value? How do you know this bike is the only bike you'll need? Because you gotta trust the Process, that's why. The Process 134 DL 27.5 is thoughtfully put together to ensure every box is checked. It features a spec that puts the money where it matters: suspension, brakes, and drivetrain. It also comes in sizes XS-XL ensuring that no matter how tall or short you stand you'll find a perfect fitting ride. It's perfection in a bike.
You want a nice bike, but you've been hesitating to pull the trigger. What's the right amount of travel? How can you be sure you're getting great value? How do you know this bike is the only bike you'll need? Because you gotta trust the Process, that's why. The Process 134 DL 29 is thoughtfully put together to ensure every box is checked and strikes a perfect balance between price, performance, and an easy upgrade path.
The perfect Goldilocks bike between the Process 134 and Process X, the Process 153 hits all the sweet spots at a very budget-friendly price. The 160/153mm front and rear suspension gives you unwavering reliability on tricky descents while still climbing with ease. It's spec'd with everything you need and nothing you don't. Strong brakes, dependable suspension and grippy tires equal the perfect all-around package. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
The Process 153 27.5 is the smaller-wheeled sibling to our excellent all-around Goldilocks bike, the Process 153 29. The Process 153 hits all the sweet spots at a very budget-friendly price. The 160/153mm front and rear suspension gives you unwavering reliability on tricky descents while still climbing with ease. It's spec'd with everything you need and nothing you don't. Strong brakes, dependable suspension and grippy tires equal the perfect all-around package. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning. 27.5" WHEELS The benefits of the 27.5-inch wheel are simple: they roll over obstacles and track better than 26-inch wheels, but are more maneuverable and nimble than 29-inch ones.
The Process 153 DL 29 has been the steed of choice for enduro rippers all over the world. It's the perfect balance of descending prowess and climbing efficiency. We've built this bike to be ready to dominate right out of the box, but there are easy ways to upgrade should you choose to do so. With 160mm of front travel and 153mm in the rear, burly Maxxis tires, and ultra-supportive suspension, the Process 153 DL 29 will become your most reliable trail slayer.
For the rider looking to go big on terrain but not break the bank, the Process X CR is a perfect choice. A carbon frame is laced with a durable, but practical build to ensure your money goes where it matters. The 170mm of ultra-squishy travel makes quick work of those features you've been eyeing up. And don't be fooled by the numbers, this bike may go big on the descents, but it is built to ensure you make it to the top with plenty of gas left in the tank. Wheel size: - Size Small: 29-inch (front) / 27.5-inch (rear) - Sizes Medium – X-Large: 29-inch KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
If the Undertaker rode a mountain bike, he'd undoubtedly ride the Process X CR DL. Aimed at nothing but ripping riders on the most technical of terrain, the Process X DL is a monster on the trails. A full carbon frame features high-end components that leave nothing to be desired. 170mm of plush travel ensures that even the biggest hits are well tamed. Clean lines, fewer cables, and more badass than ever before, the Process X CR DL is as stealthy as it is aggressive. Wheel size: - Size Small: 29-inch (front) / 27.5-inch (rear) - Sizes Medium – X-Large: 29-inch KONA CARBON Designed to be lightweight and built to demanding standards. Carbon fiber has long been praised for its weight and strength, but rather than chase grams, we place our efforts on the performance that is possible when the right high-modulus fibers are in the right places. Our designers work very closely with our manufacturer to ensure there is no compromise to the desired ride characteristics, durability and – finally – weight stipulations that we expect from our bikes. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems. 12x148mm AXLE 12x142mm, 12x148 and 12x157 rear axle standards provide two major advantages to the Kona rider: the 12mm diameter of the rear axle provides the rear hub and frame with a stiff interface, while the 142/148/157mm outer diameter of the hub allows the wheel to be quickly and properly positioned in the frame before the rear axle is inserted. For 2017, you'll see the 12x148 Boost standard in the mix. Boost spacing provides more tire clearance at the chainstay yoke, while the rear wheel is stiffer and more durable relative to a 12x142 thru-axle. BEAMER INDEPENDENT SUSPENSION Built to be off-the-top progressive, Beamer Independent Suspension helps the bike to stay higher in the travel and recover from hits more quickly. The Operators are instilled with what our product managers like to call "pure shock movement," whereby the shock is protected from side load. Designed to be highly tuneable and extremely durable, the Beamer IS is our version of greased lightning.
$6,199.99
UNCOMPROMISING PERFORMANCE The all-new Mach 4 SL; a podium seeking missile crafted from the ground up as a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and tractability. MORE FUN Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build, aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock. - XC-Tuned DW-Link™ Suspension - New XC Adapted Travel-Adjustable Flip-Chip - Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel - Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel - Lighter, More Durable High-Load Enduro Max bearings - Size-Specific Carbon Layup Across Size Range - Low Standover Fits Riders 4'10" to 6' 7" - Large Water Bottle Clearance on All Sizes - Pivot's full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials, and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'10" to 6'7" has a bike that feels perfect and performs at the optimum level for their size. - Injection Molded Rubberized Frame Protection - Full Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible Under Top Tube and BB - Simplified Twistloc Suspension Lockout
$6,999.99
UNCOMPROMISING PERFORMANCE The all-new Mach 4 SL; a podium seeking missile crafted from the ground up as a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and tractability. MORE FUN Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build, aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock. - XC-Tuned DW-Link™ Suspension - New XC Adapted Travel-Adjustable Flip-Chip - Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel - Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel - Lighter, More Durable High-Load Enduro Max bearings - Size-Specific Carbon Layup Across Size Range - Low Standover Fits Riders 4'10" to 6' 7" - Large Water Bottle Clearance on All Sizes - Pivot's full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials, and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'10" to 6'7" has a bike that feels perfect and performs at the optimum level for their size. - Injection Molded Rubberized Frame Protection - Full Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible Under Top Tube and BB - Simplified Twistloc Suspension Lockout
$6,999.99
Optimized for the Entire Mountain We tailored every detail of the Switchblade to deliver a bike ready to conquer the entire mountain. Progressive geometry broadens the performance envelope while retaining the versatility that made the original so good. Always with an eye on confidence-inspiring design, we shortened, straightened, and steepened the Switchblade's seat tube to allow longer travel dropper posts. Uncommon Versatility The Switchblade was already a bike ahead of its time and the new Switchblade pushes the versatility envelope even further. It doesn't matter if you want to run 29er wheels, 27.5" X 2.8" plus tires, or even a 29"/27.5" combo – the Switchblade can be perfected for all. Beyond All Mountain The new Switchblade's extraordinary versatility and category-bending capability redefine performance across every type of trail. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. Product Details: - Ultra-Light Hollow Core Carbon Frame. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160 mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy-to-find UDH rear derailleur hanger for peace of mind when traveling. - Hassle-free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+", and 27.5" rear/29" front (mullet) wheel sizes without compromise thanks to the Flip chip's adjustable geometry feature. - Custom-tuned Fox Live Valve builds allow for layers of tuning for a plusher-than-plush feel unmatched by any other suspension setup. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system is compatible with mounts under the top tube and integrated into the underside of the frame.
$699.00
As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)
$799.00
The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible
Page 1 of 6 Next page