Handlebars & Grips

Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.

Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps

Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

The Gossamer Compact uses the same evolved shape as our high-end handlebars – shallow 125mm drop, short 80mm reach, optimized for the shape of current shifters. Rider comfort is further enhanced by the flattened top section, giving an easy platform to rest your hands on. The Gossamer Compact uses 6066 aluminum, which is double butted and tapered to put strength where it's needed and trim weight where it's not. Shot peening improves fatigue resistance, and an extra-wide bulge section in the center of the bar leaves ample room for accessories. - Double butted, tapered, and shot-peened AL6066 - 34mm ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 372g - Lever Compatability: Mountain 22.2mm

Designed for the XC racers. 5mm of 100% silicone compound provides excellent vibration dampening and superior comfort. - 100% Silicone weather resistant material - Plastic bar end plugs - 5mm thick

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)

Traditional EVA tape looks great on the bike and feels comfortable on the hands no matter how long the ride. EVA tape is flexible and comes with an adhesive backing so it wraps well and stays put during and after installation. - EVA vibration-damping foam increases grip and comfort - Adhesive backing for perfect bar placement - 78 inches (200cm) per roll - Finishing strips and bar end plugs included

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

Ritchey Classic components are high-polished silver to accentuate a special build that requires a classy touch. EvoCurve is a short and shallow compact drop bar with an oversized comfortable top section. - 6061 aluminum - Width measured at the hood - Bar Clamp Diameter: 31.8mm - Bar Drop: 130mm - Bar Reach: 80mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Clip-on Compatible: Yes - Flare: 4

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Features and Benefits - 250cm in Length—accommodates bars up to 50cm - Grip compound maintains traction when wet - Durable stretch for installation - Vibration-damping backer strip - Hard-wearing construction - 3mm thick What It Is ENVE-designed bar tape that provides maximum ride feel without compromising comfort and ensures grip in wet conditions. 250cm in length, 3mm thick, and silicone-backed compound that provides the right amount of stretch for ease of installation and durability. Science & Insight For ENVE, handlebar tape is more than a fashion accessory; it is a key component that sets the tone for your ride. Bar tape that becomes slippery when wet and causes discomfort diminishes confidence and the ride experience. As such, ENVE Handlebar Tape is designed with a grip compound that ensures bare-handed traction despite wet conditions. To maximize ride feel without compromising comfort, ENVE Handlebar Tape is 3 millimeters thick with a vibration-damping silicone backer strip that ensures comfort for long miles over rough roads.

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

The GS1 Evo reimagines what ergonomic comfort can be for touring, trail and E-Bikes by minimizing aching hands and numb fingers. Ergon took the best-selling GP1 winged grip and evolved it with popular characteristics of the mountain specific GA3. The GS1 Evo features a larger supportive wing than the GA3 and a sleeker profile than the GP1, a specific textured grip zone for the thumb, fingers and palm and a softer overall touch. Always prioritizing materials, the GS1 Evo is composed a proprietary rubber compound Made in Germany. From quick jaunts across town to endurance events to journeys across continents, the GS1 Evo is a new favorite among many riders! - Ergonomic performance comfort grip - Reduces hand and wrist discomforts - Made in Germany

Made with recycled materials, this grip features a contoured shape and dual-density construction for ultimate support on any trail. Lock-on comfort Take the long way with the XR Endurance Comp Recycled Grip made using recycled plastics at the grip core. Contoured shaping provides comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers stay in place. This Dual-Density grip features a lightweight lock-on design that securely attaches to any bar. Using recycled materials in this product helps provide second life to unwanted end of life plastics. Product details - Grip core is made from recycled plastic - Contoured design comfortably supports palm to decrease fatigue - Opposing tread pattern absorbs shock in palms and increases grip at fingertips - Dual-density compound provides secure grip, control, and comfort - Continuous tread pattern optimizes grip for moisture management and shock absorption - Lock-on clamp securely holds grip core to bar, eliminating slipping Features: The net effect Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution. A global issue Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world. Better products for a better planet We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.

Chunky XXL 8.25” are over 60% longer than standard grips! - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

Easton’s new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on gnarly terrain and long gravel assaults. - Weight of 42cm bar (grams): 290 - Bar Drop (mm): 80 - Drop Bend Style: Compact - Bar Reach (mm): 120 - Material: Aluminum - Bar Top Style: Round

The Performance bar tape features a lightweight design backed with shock reducing foam that absorbs vibration while maintaining a thin profile. - Ultra-lightweight (50g/set) bar tape is designed to provide the optimal combination of comfort and control - Soft and tacky elastomeric surface layer - 30mm x 2,100mm - Package includes end plugs and finishing tape - 2.5mm thickness

The handlebar grips on your bike are one of the few contact points that keep you connected to your bike. The elegant ergonomic curves and rib pattern texture keep your hands happy all day long by providing anti-slip, all day vibration dampening comfort. Whether you're riding a mountain bike, commuter, beach cruiser, bmx or e-bike, check out the natural comfort and style that these handsome grips add to your ride. The Dura Cork version of Planet Bike's Happy Hands Handlebar lock-on grips feature a durable natural cork and rubber composite construction that will keep your hands comfortable and in control no matter what kind of riding you are doing. - Ergonomic shape and durable cork/rubber construction give optimum anti-slip control, even on demanding terrain or in wet conditions - Soft & ribbed patterned texture provide superior vibration dampening and increase comfort by reducing hand fatigue on long rides - They feel great with both gloves and bare hands - Designed to fit any standard straight bicycle handlebar with an outer diameter between 20-22mm - Installation is easy with a single lock-on alloy clamping collar that keeps grips in place while you ride. Hex wrench for installation is included - Size: 130mm length, 31.75mm diameter - Weight: 102 grams

The new GFR1 has a slim overall shape for maximum feedback, yet still provides an extremely high level of damping through the ribbed section under the palm. The lower gripping zone is aggressive to keep gripping forces at a minimum when lifting the front wheel. - Shape: Round - Lock On: Yes - Grip Shift Specific: No - Flange: No

The EA70 is Easton’s top-end aluminum handlebar with traditional, round tops. The EA70 is given an upgrade with the new MCD shape technology, with grooves for brake and gear cable routing. This race-proven handlebar has won numerous Cyclocross Nationals titles and benefits from all of the aluminum construction techniques that Easton is famous for — including TaperWall technology. - Weight for 42cm bar (grams): 280 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Aluminum - Bar Top Style: Round